Earth Drills and Augers
The robust earth drills for excavators up to 45t / 9900000 lbs, skidsteers and telehandlers from the Kinshofer-daughter Auger Torque are an economical and customized solution for the drilling of holes for e.g. fence posts, poles, foundations or plant holes for bushes and trees. Well drilling or screw pile installations are also not a problem with these reliable earth drills.
The non-dislodgement shaft (NDS) provides for more safety and less downtimes, as the shaft cannot dislodge from the mechanism. The hydraulic oil used inside of the unit is dyed blue, serving as an indicator for service times and facilitating the detection of leakages. The robust head plates with the strong forged ears cope with the heavy strain of daily use without showing any signs of fatigue. The greasing points are easily accessible.
The augers are perfectly matched to the corresponding earth drills and every application. A constant spiral configuration and a shallow pitch flight guarantee extreme efficiency and productivity. Thanks to the easily exchangeable wear parts like pilots and teeth, the auger can be adjusted to different ground conditions. Due to the patented Shock Lock System, the teeth have a longer lifespan, shocks are absorbed and tooth loss prevented.
Additional adjustment comes from auger extensions in different length options – available as regular or telescopic versions.
Ideal for the safe transport at the carrier machine: the suitable rope wind hitch for every earth drill.
Torque meter: the correct torque is extremely important for screw pile installations to guarantee the structure's safety. The detection of the torque data in real time for this critical operation is an easy task with the new Auger Torque torque meter with an accuracy of up to 99.7%.
Alignment monitor: for screw pile installations, the correct alignment of the auger is crucial. Thanks to the sensor mounted to the earth drill and the display in the driver's cabin, the operator is able to control the drilling and immediately correct each deviation. The sensor is water-resistant and thus suitable for every weather condition.
Mixer Bowl and Stump Planers
The Auger Torque earth drills are very versatile and can also be used with other tools instead of augers, that can easily be mounted to the unit.
Mixer bowls: fencing tasks on rough grounds often require to fix fence posts with cement that needs to be mixed in small quantities on site, however, rough terrain can also mean, that a traditional mixer cannot be accessed. The drill/mix solution of the CM model is the perfect solution here.
Stump planer: the robust stump planers guarantee an efficient and clean removal of tree stumps. They are compatible to the most earth drills offered above. The unique pilot is drilling into the tree stump and pulling down the planer unerringly.
X1500 for excavators with 1 to 2t / 2200 to 4400 lbs operating weight.
X2000 for excavators with 1 to 2.5t / 2200 to 5500 lbs operating weight.
X2500 for excavators with 1,5 to 3t / 3300 to 6600 lbs operating weight.
3000MAX for excavators with 2 to 4t / 4400 to 8800 lbs operating weight and skidsteers.
3500MAX for excavators with 2.5 to 4.5t / 5500 to 9900 lbs operating weight.
4500MAX for excavators with 3 to 5t / 6600 to 11000 lbs operating weight and skidsteers.
5500MAX for skidsteers and telehandlers.
7000MAX for excavators with 5 to 7t / 11000 to 15400 lbs operating weight and skidsteers and telehandlers.
8000MAX for excavators with 6 to 8t / 13200 to 17600 lbs operating weight and skidsteers and telehandlers.
15000MAX for excavators with 10 to 15t / 22000 to 33000 lbs operating weight.
20000MAX for excavators with 13 to 20t / 28600 to 44000 lbs operating weight.
25000MAX for excavators with 15 to 22t / 33000 to 48400 lbs operating weight.
35000MAX for excavators with 20 to 45t / 44000 to 99000 lbs operating weight.
42000MAX for excavators with 20 to 45t / 44000 to 99000 lbs operating weight.
50000MAX for excavators with 21 to 45t / 46200 to 99000 lbs operating weight.
ML1500 for mini loaders.
ML2000 for mini loaders.
ML2500 for mini loaders.
10000 for backhoes.
15000 for backhoes.
S4/S5/S6 augers available with different diameters, pilots and teeth.
PA augers for heavy duty tasks available with different diameters, pilots and teeth.
CM180 for excavators with 3 to 7t / 6600 to 15400 lbs operating weight at a bowl capacity of 180 liters / 0.24 c.y. and a weight of 33 kg / 73 lbs.
SP250 for excavators with 1 to 5t / 2200 to 11000 lbs operating weight, diameter 250 mm / 9.84 in.
SP350 for excavators with 4.5 to 8t / 9900 to 17600 lbs operating weight and high flow skidsteers, diameter 350 mm / 13.78 in.
Tapered augers for the drilling in slopes are available optionally on request.